MD200 Chlorine Meter 3 in 1
ລາຄາ 1.056$ ບໍ່ລວມອາກອນ
ມີຢູ່ໃນສາງProduct Type:Colorimeter
Brand:Tintometer
Product Line:Lovibond
Class:Chlorine, pH, Cyanuric Acid
Notes:Tablet Reagents included with Unit
Includes:Instrument in carrying case, 4 Micro batteries (AA), 3 Round vials (Glass) with lids, Tablet Reagents for each parameter, Guarantee sheet, Certificate (COC), Instruction manual
| Instrument: | double wavelength, automatic wavelength selection, direct reading colorimeter |
| Light Source: | LEDs, interference fiters (IF) and photosensor in transparent cell chamber. Wavelength specification of the IF: 530 nm Δ λ = 5 nm 560 nm Δ λ = 5 nm |
| Wavelength Accuracy: | ± 1 nm |
| Photometric Accuracy: | 3% Full Scale (T = 20°-25°C) |
| Photometric Resolution: | 0.01 A |
| Power Supply: | 4 x AA Batteries Lifetime: approximately 53 hours or 15,000 tests |
| Auto-Off: | automatic switch-off |
| Display: | LCD (back-light upon keypress) |
| Storage: | internal ring memory for 16 data sets |
| Interface: | Infrared interface for data transfer |
| Time: | Real time and date |
| Calibration: | Supplied factory calibrated. User calibration is possible. Reset to factory calibration is possible. |
| Dimensions: | 190 x 110 x 55 mm |
| Weight: | 455 grams (including batteries) |
| Ambient Conditions: | Temperature: 5-40°C Relative humidity: 30-90% (non-condensing) |
| Waterproof: | IP 68 (1 hour at 0.1 meter); floats |
| Compliance: | CE |
| Includes: | Instrument in carrying case 4 Micro batteries (AA) 3 Round vials (Glass) with lids Liquid Reagents for each parameter Guarantee sheet Certificate (COC) Instruction manual |
ຄຳອະທິບາຍ
Lovibond® MD 200 Colorimeter, 3 In 1, Chlorine, pH, Cyanuric Acid
| Test | Test Range |
| Chlorine | 0.02 – 4.0 mg/l |
| pH Value | 6.5-8.4 |
| Cyanuric Acid | 0 – 160 mg/l |
Designed to meet the latest technical requirements, the MD 200 photometer can be used in practically every area of water analysis. The high-precision optics with its top-quality interference filters uses long-term stable LEDs as light-source. Because there are no moving parts, the entire measurement device requires absolutely no maintenance. Precise and reproducible analysis results are obtained in a short time. The units impress with their user-friendliness, ergonomic design, compact dimensions and easy handling. The tests are conducted using either Lovibond® tablet reagents with long-term stability and a guaranteed minimum 5 or 10 year shelf life or using liquid reagents.
Scroll Memory (SM)
To avoid unnecessary scrolling for the required test method, the instrument memorizes the last method used before switching off the instrument. When the instrument is switched on again, the scroll list comes up with the last used test method first.
Zero Setting (OTZ)
For certain versions of the instrument it is not necessary to zero the instrument each time. The zero setting is held in memory until the device is turned off. (One Time Zero – OTZ). The zero setting can be confirmed whenever it is usefull.
Data Transfer (IRiM)
The optional available IRiM (infra-red interface modul) uses modern infra-red technology to transmit measurement data from the MD 200 photometer to one of 3 optional interfaces.
ສິນຄ້າທີ່ກ່ຽວຂ້ອງ
-
The TB 300 IR (formerly TurbiDirect) is an easy-to-use auto ranging turbidity unit designed for the laboratory or portable use. It has an infra red light source and 90 ° detection anlge which conforms to ISO 7027.
The instrument measures from 0 to 1100 NTU and can store up to 1000 data sets with time, date and sample ID. Results can be recalled at any time, and can be downloaded to a PC with the supplied cable.
The large graphic display ensures results are easy to interpret. Instructions during analysis can also be displayed.
The unit is supplied with a set of calibration check standards for further result accuracy.ລາຄາ 1.887$ ບໍ່ລວມອາກອນ -
Display Graphic Display Interfaces Infra red interface for test data transfer (via IRiM)
RJ45 socket for internal updatesOptics LEDs, Interference Filters (IF) and photo sensor in transparent sample chamber.
Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nmWavelength Accuracy ± 1nm Photometric Accuracy 2% full scale (at 20 ° C to 25 ° C) Photometric Resolution 0.005 A Operation Acid and solvent resistant touch sensitive keypad; audible feedback via integrated beeper Power Supply 4 x AA batteries; operating time 26 hours continuous or 3500 tests Auto Off approx 20 minutes after last keypress with audible signal Dimensions Unit 210 x 95 x 45 mm
Carry case 395 x 295 x 106 mmUnit Weight 450g Ambient Conditions 5-40 ° C, 30-90% rel humidity (non condensing) Memory Capacity 1000 data sets with time, date, sample ID Conformity CE ລາຄາ 1.887$ ບໍ່ລວມອາກອນ -
SKU: RE-511222BT
Dimension: 0
Weight: 0.0000
Manufacturer: Lovibond
Measurement Range : 0.01 – 6 mg/L
Other Function : No
Sensor Output Interface : No
Power Supply : No Need
Resolution : No
Water resistance : No
Data logger : N/A
Accuracy : Noລາຄາ 78$ ບໍ່ລວມອາກອນ -
ລາຄາ 1.084$ ບໍ່ລວມອາກອນ -
SKU TC-445S Dimension 750 x 730 x 1640mm Weight 78500.0000 Manufacturer Lovibond ລາຄາ 3.445$ ບໍ່ລວມອາກອນ -
Product Type : ReagentsBrand: TintometerProduct Line: LovibondClass: DPDUnit Size: 500 ct.ລາຄາ 78$ ບໍ່ລວມອາກອນ
