HI98312 DIST®6 EC/TDS/C°-TESTER, (0.00-20.00 MS/CM – 0.00-10.00 G/L (PPT)) WATERPROOF
Price 0$ excl.VAT
In StockDescription
Product information “HI98312 DiST®6 EC/TDS/C°-Tester, (0.00-20.00 mS/cm – 0.00-10.00 g/l (ppt)) waterproof”
DiST ® 6 is one of the “tops” among the conductivity testers. The Tester simultaneously measures conductivity or TDS and temperature. It is easy to use, fast and accurate, and is therefore ideally suited for routine measurements. With replaceable graphite probe.
- Ranges up to 20.00 mS / cm (EC) and 10.00 g / L (TDS)
- Dual display of conductivity or TDS and temperature
- Easily replaceable graphite EC / TDS probe
- Automatic calibration and temperature compensation
- Selectable TDS factor and temperature coefficient
- Stability indicator for safe values
- HOLD function to freeze a reading in the display
- Battery charge indicator and automatic shut-off
pecification:
Measuring range EC 0-20.00 mS / cm
Resolution EC 0.01 mS / cm
Accuracy EC ± 2% of full scale
Measuring range TDS 0 to 10.00 g / L (ppt)
Resolution TDS 0.01 g / L (ppt)
TDS Accuracy ± 2% of full scale
Calibration EC / TDS automatic, at 1 Point (12.88 mS / cm or 6.44 g / L (ppt))
Selectable TDS factor from 0.45 to 1.00
Temperature measuring range 0.0 to 60.0 ° C
Temperature resolution 0.1 ° C
T ° Accuracy ± 0.5 ° C
Temperature compensation Automatic, β selectable between 0.0 and 2.4% / ° C Power supply 4 x 1.5 V batteries / approx 100 hours of shut-off after 8 min measurement interval
Dimensions 163 x 40 x 26 mm Weight 100 g
Related Products
-
Price 3.409.000$ excl.VATSale 3.136.000$ excl.VAT -
SKU RE-511052BT
Dimension 0
Weight 0.0000
Manufacturer Lovibond
Measurement Range 0.01 – 6 mg/L
Other Function No
Sensor Output Interface No
Power Supply No Need
Resolution No
Water resistance No
Data logger N/A
Accuracy NoPrice 78$ excl.VAT -
Highlights
– Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
– Portable instrument for use in the lab, plant or out in the field
– User interface is intuitive and easy to navigate
The MD 600 multi-parameter photometer is pre-programmed with over 120 water testing parameters and ranges. Featuring a rugged, waterproof design, this instrument is the ideal testing solution for a variety of applications and industries.
Applications
– Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Galvanization Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water TreatmentPrice 1.948$ excl.VAT -
Product Type:ColorimeterBrand:TintometerProduct Line:LovibondClass:Chlorine, pH, Cyanuric AcidRange:0.01 – 6.0 mg/l, 0.1 – 10 mg/l Cl2, 6.5 – 8.4 pH and 0 – 160 mg/l Cyanuric AcidIncludes:Instrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Tablet reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualInstrument: Double wavelength, automatic wavelength selection, direct reading colorimeter Light Source: LEDs, interference fiters (IF) and photosensor in transparent cell chamber.
Wavelength specification of the IF:
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nmWavelength Accuracy: ± 1 nm Photometric Accuracy: 3% Full Scale (T = 20°-25°C) Photometric Resolution: 0.01 A Power Supply: 4 x AAA (LR 03) Batteries
Lifetime: approximately 17 hours or 5,000 testsAuto-Off: 10 minutes after last keypress Display: LCD (back-light upon keypress) Storage: automatic; 16 data sets with time and date stamp Interface: Infrared interface for data transfer Time: Real time and date Calibration: Supplied factory calibrated.
User calibration is possible.
Reset to factory calibration is possible.Dimensions: 155 x 75 x 35 mm Weight: 250 grams (including batteries) Ambient Conditions: Temperature: 5-40°C
Relative humidity: 30-90% (non-condensing)Waterproof: IP 68 (1 hour at 0.1 meter); floats Compliance: CE Warranty: 2 years Includes: Instrument in carrying case
4 Micro batteries (AAA)
3 Round vials (Glass) with lids
Tablet Reagents for each reagent
Crushing/Stirring Rod
Guarantee sheet
Certificate (COC)
Instruction manuaPrice 1.223$ excl.VAT -
The TB 300 IR (formerly TurbiDirect) is an easy-to-use auto ranging turbidity unit designed for the laboratory or portable use. It has an infra red light source and 90 ° detection anlge which conforms to ISO 7027.
The instrument measures from 0 to 1100 NTU and can store up to 1000 data sets with time, date and sample ID. Results can be recalled at any time, and can be downloaded to a PC with the supplied cable.
The large graphic display ensures results are easy to interpret. Instructions during analysis can also be displayed.
The unit is supplied with a set of calibration check standards for further result accuracy.Price 1.887$ excl.VAT -
Product Type: Turbidity Products and Accessories
Brand: Tintometer
ProductLine: Lovibond
Range: (0.1, 20, 200, 800 NTU)Price 445$ excl.VAT
