- Recent add item
-
×
Subtotal: 4.223$
HI705 CHECKER HC ® – SILICA, LR
Price 94$ excl.VAT
In StockDescription
Product information “HI705 Checker HC ® – Silica, LR”
The HI 705 Checker®HC is a simple, accurate, and cost effective way to measure low ranges of silica. Designed as a more accurate alternative to chemical test kits, the HI 705 provides quick, accurate results in four easy steps.
The HI 705 uses an adaptation of the ASTM D859 method of heteropoly blue method. The reaction between silica and reagents causes a blue tint in the sample.
PRIMARY APPLICATIONS:* Water Quality * Education * Environmental * Water Treatment (Boilers/Cooling Towers)
Order Information: The HI 705 Checker®HC is supplied with 2 cuvettes and caps, reagent starter kit (1 bottle reagent A, 6 packets of reagent B, and 6 packets of reagent C), 1 x 1.5V AAA battery, and an instruction manual.
Related Products
-
Price 19$ excl.VAT -
220 to 240V ±°C specified for stirred 500mL water sample. For BOD (T=20°C ±0.5°C) 600mm 2 to 40°C, steps of 0.1°C CE 441 x 513 x 702mm LED 0.1°C 50Hz 702mm 39kg 2 to 40 °C 135L 220 to 240V, 50 Hz 4 internal sockets 600mm Price 3.445$ excl.VAT -
Product Type:ColorimeterBrand:TintometerProduct Line:LovibondClass:Chlorine, pH, Cyanuric AcidRange:0.01 – 6.0 mg/l, 0.1 – 10 mg/l Cl2, 6.5 – 8.4 pH and 0 – 160 mg/l Cyanuric AcidIncludes:Instrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Tablet reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualInstrument: Double wavelength, automatic wavelength selection, direct reading colorimeter Light Source: LEDs, interference fiters (IF) and photosensor in transparent cell chamber.
Wavelength specification of the IF:
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nmWavelength Accuracy: ± 1 nm Photometric Accuracy: 3% Full Scale (T = 20°-25°C) Photometric Resolution: 0.01 A Power Supply: 4 x AAA (LR 03) Batteries
Lifetime: approximately 17 hours or 5,000 testsAuto-Off: 10 minutes after last keypress Display: LCD (back-light upon keypress) Storage: automatic; 16 data sets with time and date stamp Interface: Infrared interface for data transfer Time: Real time and date Calibration: Supplied factory calibrated.
User calibration is possible.
Reset to factory calibration is possible.Dimensions: 155 x 75 x 35 mm Weight: 250 grams (including batteries) Ambient Conditions: Temperature: 5-40°C
Relative humidity: 30-90% (non-condensing)Waterproof: IP 68 (1 hour at 0.1 meter); floats Compliance: CE Warranty: 2 years Includes: Instrument in carrying case
4 Micro batteries (AAA)
3 Round vials (Glass) with lids
Tablet Reagents for each reagent
Crushing/Stirring Rod
Guarantee sheet
Certificate (COC)
Instruction manuaPrice 1.223$ excl.VAT -
Highlights
– Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
– Portable instrument for use in the lab, plant or out in the field
– User interface is intuitive and easy to navigate
The MD 600 multi-parameter photometer is pre-programmed with over 120 water testing parameters and ranges. Featuring a rugged, waterproof design, this instrument is the ideal testing solution for a variety of applications and industries.
Applications
– Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Galvanization Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water TreatmentPrice 1.948$ excl.VAT -
The compact TB 210 IR (formerly the TurbiCheck infrared) turbidity meter is designed to allow fast, precise on site or laboratory measurements. The unit measures scattered light at 90 ° angle as stipulated in ISO 7027.
Measuring in the range 0-1100 NTU, the unit is suitable for various applications including drinking water, waste water, process and pool water testing. The infrared light source allows for measurement of coloured and colourless samples.
A simple keypad layout and range selection button ensures further ease of use. Up to 16 results can be stored and reviewed with time and date. The instrument is supplied in a robust carry case with all necessary accessories, and a set of calibration standards.Price 1.000$ excl.VAT -
The TB 300 IR (formerly TurbiDirect) is an easy-to-use auto ranging turbidity unit designed for the laboratory or portable use. It has an infra red light source and 90 ° detection anlge which conforms to ISO 7027.
The instrument measures from 0 to 1100 NTU and can store up to 1000 data sets with time, date and sample ID. Results can be recalled at any time, and can be downloaded to a PC with the supplied cable.
The large graphic display ensures results are easy to interpret. Instructions during analysis can also be displayed.
The unit is supplied with a set of calibration check standards for further result accuracy.Price 1.887$ excl.VAT
