Subtotal: 1.268$
Price 0$ excl.VAT
In StockThe HI 96702 meter measures the copper content in water and wastewater.
This meter uses an exclusive positive-locking system to ensure that the cuvette is in the same position every time it is placed into the measurement cell. It is designed to fit a cuvette with a larger neck making it easier to add both sample and reagents. The cuvette is made from special optical glass to obtain best results.
Range : 0.00 to 5.00 mg/L (ppm)
Resolution : 0.01 mg/L (ppm)
Accuracy : ±0.02 mg/L ±4% of reading @ 25°C
Light Source : Tungsten lamp
Light Detector : silicon photocell with narrow band interference filter @ 575 nm
Environment : 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Power Supply : (1) 9V battery
Auto-off : After 10 minutes of non-use in measurement mode; after 1 hour of non-use in calibration mode; with last reading reminder.
Dimensions : 192 x 104 x 69 mm (7.6 x 4.1 x 2.7″)
Weight : 360 g (12.7 oz.)
Method : adaptation of the USEPA approved bicinchoninate method
Ammonia
Ammonia Range 0.0 to 99.9 ppm as NH₄⁺
Ammonia Resolution 0.1 ppm
Ammonia Accuracy ±1.0 ppm ±5% of reading
Ammonia Method adaptation of the ASTM Manual of Water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample.
General Meter
Automatic Shut-Off after ten minutes of non-use
Battery Type/Life (1) 1.5V AAA
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 81.5mm x 61mm x 37.5mm (3.2″ x 2.4″ x 1.5”)
Weight 64 g (2.25 oz.)
Photometer/Colorimeter Light Source LED @ 470 nm
Photometer/Colorimeter Light Detector silicon photocell
Ordering Information HI733 Checker® is supplied with (2) sample cuvettes with caps, ammonia reagent starter kit for 25 tests (1 bottle of HI733A-0 and 1 bottle of HI733B-0), battery, instructions and quick start guide.
