HI98130 COMBO TESTER FOR PH/EC/TDS/C° UP TO 20 MS, WATERPROOF
Price 323$ excl.VAT
In StockDescription
Product information “HI98130 COMBO Tester for pH/EC/TDS/C° up to 20 mS, waterproof”
HI 98130 simultaneously measures pH, conductivity, TDS and temperature. It is easy to use, fast and accurate, and is therefore ideally suited for routine measurements. With replaceable pH electrode.
- Dual display of pH or conductivity / TDS and temperature
- Easily replaceable pH electrode
- Rugged graphite conductivity probe
- Automatic calibration and temperature compensation
- Selectable TDS factor and temperature coefficient
- Stability indicator of safe values
- HOLD function to freeze a reading in the display
- Battery charge indicator and automatic shut-off
Specification :
Range pH 0.00 to 14.00 pH
Range EC 0 to 20 mS/cm
Range TDS 0 to 10.00 g/L
Range Temperature 0.0 to 60.0°C
Resolution pH 0.01
Resolution EC 0.01 mS/cm
Resolution TDS 0.01 g/L
Resolution Temperature 0.1°C
Accuracy pH ±0.05 pH
Accuracy EC/TDS ±2% of Measurement Range
Accuracy Temmperature ±0.5°C
PH Calibration Automatic, 2-point, stored with 2 buffers
Calibration EC / TDS automatic, 1 point (12.88 mS / cm or 6.44 ppt)
Temperature Compensation pH: automatic; EC / TDS: automatic with β selectable from 0.0 to 2.4% / ° C
Selectable TDS factor from 0.45 to 1.00
HI 73127 pH electrode (included)
Power supply 4 x 1.5V / approx 100 hours
Automatic shut-off after 8 min measurement interval
Dimensions 163 x 40 x 26 mm Weight 85 g
Related Products
-
The LovibondR MultiDirect is a microprocessor controlled photometer with ergonomically designed keypad, large graphic display and waterproof sample chamber and casing. It can operate as a bench top photometer using mains power, and is supplied with rechargeable batteries for portable use. With 6 LED light sources the Multi Direct can measure at peak absorbances for many different methods, ensuring result accuracy and reliability for many applications.
Price 2.334$ excl.VAT -
Display Graphic Display Interfaces Infra red interface for test data transfer (via IRiM)
RJ45 socket for internal updatesOptics LEDs, Interference Filters (IF) and photo sensor in transparent sample chamber.
Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nmWavelength Accuracy ± 1nm Photometric Accuracy 2% full scale (at 20 ° C to 25 ° C) Photometric Resolution 0.005 A Operation Acid and solvent resistant touch sensitive keypad; audible feedback via integrated beeper Power Supply 4 x AA batteries; operating time 26 hours continuous or 3500 tests Auto Off approx 20 minutes after last keypress with audible signal Dimensions Unit 210 x 95 x 45 mm
Carry case 395 x 295 x 106 mmUnit Weight 450g Ambient Conditions 5-40 ° C, 30-90% rel humidity (non condensing) Memory Capacity 1000 data sets with time, date, sample ID Conformity CE Price 1.887$ excl.VAT -
220 to 240V ±°C specified for stirred 500mL water sample. For BOD (T=20°C ±0.5°C) 600mm 2 to 40°C, steps of 0.1°C CE 441 x 513 x 702mm LED 0.1°C 50Hz 702mm 39kg 2 to 40 °C 135L 220 to 240V, 50 Hz 4 internal sockets 600mm Price 3.445$ excl.VAT -
Product Type:ColorimeterBrand:TintometerProduct Line:LovibondClass:Chlorine, pH, Cyanuric AcidRange:0.01 – 6.0 mg/l, 0.1 – 10 mg/l Cl2, 6.5 – 8.4 pH and 0 – 160 mg/l Cyanuric AcidIncludes:Instrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Tablet reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualInstrument: Double wavelength, automatic wavelength selection, direct reading colorimeter Light Source: LEDs, interference fiters (IF) and photosensor in transparent cell chamber.
Wavelength specification of the IF:
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nmWavelength Accuracy: ± 1 nm Photometric Accuracy: 3% Full Scale (T = 20°-25°C) Photometric Resolution: 0.01 A Power Supply: 4 x AAA (LR 03) Batteries
Lifetime: approximately 17 hours or 5,000 testsAuto-Off: 10 minutes after last keypress Display: LCD (back-light upon keypress) Storage: automatic; 16 data sets with time and date stamp Interface: Infrared interface for data transfer Time: Real time and date Calibration: Supplied factory calibrated.
User calibration is possible.
Reset to factory calibration is possible.Dimensions: 155 x 75 x 35 mm Weight: 250 grams (including batteries) Ambient Conditions: Temperature: 5-40°C
Relative humidity: 30-90% (non-condensing)Waterproof: IP 68 (1 hour at 0.1 meter); floats Compliance: CE Warranty: 2 years Includes: Instrument in carrying case
4 Micro batteries (AAA)
3 Round vials (Glass) with lids
Tablet Reagents for each reagent
Crushing/Stirring Rod
Guarantee sheet
Certificate (COC)
Instruction manuaPrice 1.223$ excl.VAT -
Product Type : ReagentsBrand: TintometerProduct Line: LovibondClass: DPDUnit Size: 500 ct.Price 78$ excl.VAT -
Product Type:Colorimeter
Brand:Tintometer
Product Line:Lovibond
Class:Chlorine and pHRange:0.02 – 2.0 mg/l, 0.1 – 8.0 mg/ Cl2, 6.5 – 8.4 pHIncluInstrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Powder reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualdes:Price 1.078$ excl.VAT
