- Recent add item(s)
-
HI7021L- 240MV ORP TEST SOLUTION - 500ML 1 × 466.000$× -
×
-
Lovibond TB-210IR Turbidity Meter 1 × 1.000$×
Subtotal: 470.889$
HI983303 EC MONITOR UP TO 1999 ΜS WITH LED-ALARM AND INLINE EC PRONTO
Price 189$ excl.VAT
In StockDescription
Product information “HI983303 EC Monitor up to 1999 µS with LED-Alarm and Inline EC PRONTO”
- Water resistant
- Continuous EC monitoring
- Visual LED alarms
This water resistant conductivity meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.
HI 983303-02 is supplied with a direct 2-pin probe and 2 m (6.6′) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.
In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.
Specification :
| Range | 0 to 1990 µS/cm | |
| Resolution | 10 µS/cm | |
| Accuracy | ±2% F.S. | |
| Calibration | manual, 1 point through trimmer | |
| Calibration Solution | HI 70031 | |
| Temperature Compensation | automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C | |
| Setpoint | 200 to 1600 µS/cm | |
| Alarm | red LED blinks when measured value differs from set point more than 100 µS/cm | |
| Probe | HI 7634/2 with 2 m (6.6′) cable and ½” thread (included) | |
| Power Supply | 12 Vdc power adapter (included) | |
| Environment | 0 to 50°C (32 to 122°F); RH max 100% | |
| Dimensions | 86 x 110 x 43 mm (3.4 x 4.3 x 1.7″) | |
| Weight | 215 g (7.6 oz.) |
Related Products
-
SKU TC-445S Dimension 750 x 730 x 1640mm Weight 78500.0000 Manufacturer Lovibond Price 3.445$ excl.VAT -
Product Type : ReagentsBrand: TintometerProduct Line: LovibondClass: DPDUnit Size: 500 ct.Price 78$ excl.VAT -
Display Graphic Display Interfaces Infra red interface for test data transfer (via IRiM)
RJ45 socket for internal updatesOptics LEDs, Interference Filters (IF) and photo sensor in transparent sample chamber.
Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nmWavelength Accuracy ± 1nm Photometric Accuracy 2% full scale (at 20 ° C to 25 ° C) Photometric Resolution 0.005 A Operation Acid and solvent resistant touch sensitive keypad; audible feedback via integrated beeper Power Supply 4 x AA batteries; operating time 26 hours continuous or 3500 tests Auto Off approx 20 minutes after last keypress with audible signal Dimensions Unit 210 x 95 x 45 mm
Carry case 395 x 295 x 106 mmUnit Weight 450g Ambient Conditions 5-40 ° C, 30-90% rel humidity (non condensing) Memory Capacity 1000 data sets with time, date, sample ID Conformity CE Price 1.887$ excl.VAT -
Product Type: Incubator
Brand: TintometerProduct Line: LovibondClass: Thermostatically ControlledCapacity: 175LTemperature Range: 2°C to 40°CTemperature Resolution: 0.1°CTemperature Accuracy: ± 1°C, specified for a stirred 500 ml water sample. For BOD (T=20°C ±0.5°C)Display: LCD, backlitPower Supply: 230 VAC 50 Hz, Grounded Rigth Angle European PlugIncludes: 3 metal racks, 1 bottom grid, 5 socketsOverall Dimensions: 470 W x 441 D x 1062 H mm (I.D.), 600 W x 610 D x 1250 H mm (O.D.)Price 3.000$ excl.VAT -
Product Type:ColorimeterBrand:TintometerProduct Line:LovibondClass:Chlorine, pH, Cyanuric AcidRange:0.01 – 6.0 mg/l, 0.1 – 10 mg/l Cl2, 6.5 – 8.4 pH and 0 – 160 mg/l Cyanuric AcidIncludes:Instrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Tablet reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualInstrument: Double wavelength, automatic wavelength selection, direct reading colorimeter Light Source: LEDs, interference fiters (IF) and photosensor in transparent cell chamber.
Wavelength specification of the IF:
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nmWavelength Accuracy: ± 1 nm Photometric Accuracy: 3% Full Scale (T = 20°-25°C) Photometric Resolution: 0.01 A Power Supply: 4 x AAA (LR 03) Batteries
Lifetime: approximately 17 hours or 5,000 testsAuto-Off: 10 minutes after last keypress Display: LCD (back-light upon keypress) Storage: automatic; 16 data sets with time and date stamp Interface: Infrared interface for data transfer Time: Real time and date Calibration: Supplied factory calibrated.
User calibration is possible.
Reset to factory calibration is possible.Dimensions: 155 x 75 x 35 mm Weight: 250 grams (including batteries) Ambient Conditions: Temperature: 5-40°C
Relative humidity: 30-90% (non-condensing)Waterproof: IP 68 (1 hour at 0.1 meter); floats Compliance: CE Warranty: 2 years Includes: Instrument in carrying case
4 Micro batteries (AAA)
3 Round vials (Glass) with lids
Tablet Reagents for each reagent
Crushing/Stirring Rod
Guarantee sheet
Certificate (COC)
Instruction manuaPrice 1.223$ excl.VAT -
Highlights
– Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
– Portable instrument for use in the lab, plant or out in the field
– User interface is intuitive and easy to navigate
The MD 600 multi-parameter photometer is pre-programmed with over 120 water testing parameters and ranges. Featuring a rugged, waterproof design, this instrument is the ideal testing solution for a variety of applications and industries.
Applications
– Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Galvanization Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water TreatmentPrice 1.948$ excl.VAT
