Price 189$ excl.VAT

In Stock

Description

Product information “HI983303 EC Monitor up to 1999 µS with LED-Alarm and Inline EC PRONTO”

  • Water resistant
  • Continuous EC monitoring
  • Visual LED alarms

 

This water resistant conductivity meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.

HI 983303-02 is supplied with a direct 2-pin probe and 2 m (6.6′) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.

Specification :

Range 0 to 1990 µS/cm
Resolution 10 µS/cm
Accuracy ±2% F.S.
Calibration manual, 1 point through trimmer
Calibration Solution HI 70031
Temperature Compensation automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint 200 to 1600 µS/cm
Alarm red LED blinks when measured value differs from set point more than 100 µS/cm
Probe HI 7634/2 with 2 m (6.6′) cable and ½” thread (included)
Power Supply 12 Vdc power adapter (included)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 86 x 110 x 43 mm (3.4 x 4.3 x 1.7″)
Weight 215 g (7.6 oz.)