5% Off
HI991301 MULTIPARAMETER PH/EC/TDS/°C – EC TO 20.00 MS
Price 8.800.000$ excl.VATSale 8.400.000$ excl.VAT
Description
- Product information “HI991301 Multiparameter pH/EC/TDS/°C – EC to 20.00 mS”
- HI 991301 has been designed to offer you pH, conductivity, total dissolved solids and temperature measurements all in a slim, lightweight, portable unit. From purified to brine water measurement, you can select the meter which will work best with your range of conductivity for greater precision.
- There are only 2 buttons, yet you can select from a range of calibration buffers and even the temperature scale (°C or °F) most familiar to you. The housing is waterproof and rated for IP 67 conditions.
- The HI 1288 pre-amplified multiparameter probe features an easy to clean sensor and a cloth junction that can be pulled longer to increase the life of the probe. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the HI 1288.
- User selectable features include different TDS factors from 0.45 to 1.00 and a range of temperature coefficients (β) from 0.0 to 2.4% for greater consistency and reproducibility. Standardized buffer recognition values are also selectable.
- This instrument easily fits in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in your way. The large, multi-level LCD displays the primary reading, temperature and calibration guides simultaneously.
- Automatic one or two point calibration
- Multi-level LCD display; The meters display the current measurement simultaneously with the current temperature.
- On-screen tutorial messages for calibration and setup
- HOLD; The HOLD button freezes readings on the display for manual recording
- Automatic Temperature Compensation
- BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings
- Measure pH, EC/TDS and temperature with one probe
- Battery % displayed on startup
- Easy to clean and keep clean
Specification :
| Range | pH | 0.00 to 14.00 pH |
| EC | 0.00 to 20.00 mS/cm | |
| TDS | 0.00 to 10.00 ppt (g/L) | |
| Temperature | 0.0 to 60.0°C (32.0 to 140.0°F) | |
| Resolution | pH | 0.01 pH |
| EC | 0.01 mS/cm | |
| TDS | 0.01 ppt | |
| Temperature | 0.1°C (0.1°F) | |
| Accuracy | pH | ±0.01 pH |
| EC | ±2% F.S. | |
| TDS | ±2% F.S. | |
| Temperature | ±0.5°C (±1.0°F) | |
| TDS Conversion Factor | selectable 0.45 to 1.00 with 0.01 increments (default 0.50) | |
| pH Calibration | automatic, one or two point calibration with two sets of memorized buffers (Standard 4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18) | |
| EC/TDS Calibration | automatic, 1 point at 6.44 ppt (CONV 0.5) at 9.02 ppt (CONV 0.7) at 12880 µS/cm (others) | |
| Temperature Compensation | pH | Automatic |
| EC/TDS | Automatic with selectable ß from 0.0 to 2.4%/°C with 0.1 increments | |
| Probe | HI 1288 PVC body, pre-amplified multiparameter probe with internal temperature sensor, DIN connector and 1.2 m (3.93’) cable (included) | |
| Battery Type / Life | 1.5V AAA (3) /approximately 500 hours of continuous use. auto-off after 8 minutes of inactivity | |
| Environment | 0 to 50°C (32 to 122°F); RH max 100% | |
| Dimensions | 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) | |
| Weight | 205 g (7.2 oz.) |
Related Products
-
Highlights
– Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
– Portable instrument for use in the lab, plant or out in the field
– User interface is intuitive and easy to navigate
The MD 600 multi-parameter photometer is pre-programmed with over 120 water testing parameters and ranges. Featuring a rugged, waterproof design, this instrument is the ideal testing solution for a variety of applications and industries.
Applications
– Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Galvanization Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water TreatmentPrice 1.948$ excl.VAT -
Display Graphic Display Interfaces Infra red interface for test data transfer (via IRiM)
RJ45 socket for internal updatesOptics LEDs, Interference Filters (IF) and photo sensor in transparent sample chamber.
Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nmWavelength Accuracy ± 1nm Photometric Accuracy 2% full scale (at 20 ° C to 25 ° C) Photometric Resolution 0.005 A Operation Acid and solvent resistant touch sensitive keypad; audible feedback via integrated beeper Power Supply 4 x AA batteries; operating time 26 hours continuous or 3500 tests Auto Off approx 20 minutes after last keypress with audible signal Dimensions Unit 210 x 95 x 45 mm
Carry case 395 x 295 x 106 mmUnit Weight 450g Ambient Conditions 5-40 ° C, 30-90% rel humidity (non condensing) Memory Capacity 1000 data sets with time, date, sample ID Conformity CE Price 1.887$ excl.VAT -
SKU: RE-511222BT
Dimension: 0
Weight: 0.0000
Manufacturer: Lovibond
Measurement Range : 0.01 – 6 mg/L
Other Function : No
Sensor Output Interface : No
Power Supply : No Need
Resolution : No
Water resistance : No
Data logger : N/A
Accuracy : NoPrice 78$ excl.VAT -
Price 4.000$ excl.VAT
-
220 to 240V ±°C specified for stirred 500mL water sample. For BOD (T=20°C ±0.5°C) 600mm 2 to 40°C, steps of 0.1°C CE 441 x 513 x 702mm LED 0.1°C 50Hz 702mm 39kg 2 to 40 °C 135L 220 to 240V, 50 Hz 4 internal sockets 600mm Price 3.445$ excl.VAT -
The LovibondR MultiDirect is a microprocessor controlled photometer with ergonomically designed keypad, large graphic display and waterproof sample chamber and casing. It can operate as a bench top photometer using mains power, and is supplied with rechargeable batteries for portable use. With 6 LED light sources the Multi Direct can measure at peak absorbances for many different methods, ensuring result accuracy and reliability for many applications.
Price 2.334$ excl.VAT
