HI96822 SEAWATER ANALYSIS (SALINITY) – DIGITAL REFRACTOMETER PORTABLE
ລາຄາ 0$ ບໍ່ລວມອາກອນ
ມີຢູ່ໃນສາງຄຳອະທິບາຍ
Product information “HI96822 Seawater Analysis (Salinity) – Digital Refractometer Portable”
- The dual-level LCD displays measurement and temperature readings simultaneously
- Automatic Temperature Compensation for accurate measurements
- Easy measurement; place a few drops of the sample in the well and press the READ key
- BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings.
- IP65 water protection; built to perform under harsh laboratory and field conditions.
- Quick, accurate results, readings are displayed in approximately 1.5 seconds.
- Single point calibration with distilled or deionized water
- Small sample size, can be as small as 2 metric drops.
- Automatic shut-off after three minutes of non-use
- Stainless steel sample well, easy to clean and corrosion resistant
- ABS thermoplastic casing
ສິນຄ້າທີ່ກ່ຽວຂ້ອງ
-
Highlights
– Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
– Portable instrument for use in the lab, plant or out in the field
– User interface is intuitive and easy to navigate
The MD 600 multi-parameter photometer is pre-programmed with over 120 water testing parameters and ranges. Featuring a rugged, waterproof design, this instrument is the ideal testing solution for a variety of applications and industries.
Applications
– Boiler Water Cooling Water Disinfection Control Drinking Water Treatment Galvanization Pool Water Control Pool Water Treatment Raw Water Treatment Waste Water Treatmentລາຄາ 1.948$ ບໍ່ລວມອາກອນ -
Product Type: Incubator
Brand: TintometerProduct Line: LovibondClass: Thermostatically ControlledCapacity: 175LTemperature Range: 2°C to 40°CTemperature Resolution: 0.1°CTemperature Accuracy: ± 1°C, specified for a stirred 500 ml water sample. For BOD (T=20°C ±0.5°C)Display: LCD, backlitPower Supply: 230 VAC 50 Hz, Grounded Rigth Angle European PlugIncludes: 3 metal racks, 1 bottom grid, 5 socketsOverall Dimensions: 470 W x 441 D x 1062 H mm (I.D.), 600 W x 610 D x 1250 H mm (O.D.)ລາຄາ 3.000$ ບໍ່ລວມອາກອນ -
ລາຄາ 4.000$ ບໍ່ລວມອາກອນ
-
The compact TB 210 IR (formerly the TurbiCheck infrared) turbidity meter is designed to allow fast, precise on site or laboratory measurements. The unit measures scattered light at 90 ° angle as stipulated in ISO 7027.
Measuring in the range 0-1100 NTU, the unit is suitable for various applications including drinking water, waste water, process and pool water testing. The infrared light source allows for measurement of coloured and colourless samples.
A simple keypad layout and range selection button ensures further ease of use. Up to 16 results can be stored and reviewed with time and date. The instrument is supplied in a robust carry case with all necessary accessories, and a set of calibration standards.ລາຄາ 1.000$ ບໍ່ລວມອາກອນ -
Product Type:ColorimeterBrand:TintometerProduct Line:LovibondClass:Chlorine, pH, Cyanuric AcidRange:0.01 – 6.0 mg/l, 0.1 – 10 mg/l Cl2, 6.5 – 8.4 pH and 0 – 160 mg/l Cyanuric AcidIncludes:Instrument in carrying case, 4 Micro batteries (AAA), 3 Round vials (Glass) 24mm ∅ with lids, Tablet reagents for each parameter, Crushing / Stirring Rod, Guarantee sheet, Certificate (COC), Instruction manualInstrument: Double wavelength, automatic wavelength selection, direct reading colorimeter Light Source: LEDs, interference fiters (IF) and photosensor in transparent cell chamber.
Wavelength specification of the IF:
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nmWavelength Accuracy: ± 1 nm Photometric Accuracy: 3% Full Scale (T = 20°-25°C) Photometric Resolution: 0.01 A Power Supply: 4 x AAA (LR 03) Batteries
Lifetime: approximately 17 hours or 5,000 testsAuto-Off: 10 minutes after last keypress Display: LCD (back-light upon keypress) Storage: automatic; 16 data sets with time and date stamp Interface: Infrared interface for data transfer Time: Real time and date Calibration: Supplied factory calibrated.
User calibration is possible.
Reset to factory calibration is possible.Dimensions: 155 x 75 x 35 mm Weight: 250 grams (including batteries) Ambient Conditions: Temperature: 5-40°C
Relative humidity: 30-90% (non-condensing)Waterproof: IP 68 (1 hour at 0.1 meter); floats Compliance: CE Warranty: 2 years Includes: Instrument in carrying case
4 Micro batteries (AAA)
3 Round vials (Glass) with lids
Tablet Reagents for each reagent
Crushing/Stirring Rod
Guarantee sheet
Certificate (COC)
Instruction manuaລາຄາ 1.223$ ບໍ່ລວມອາກອນ -
Display Graphic Display Interfaces Infra red interface for test data transfer (via IRiM)
RJ45 socket for internal updatesOptics LEDs, Interference Filters (IF) and photo sensor in transparent sample chamber.
Wavelength specifications of interference filters:
430 nm Δ λ = 5 nm
530 nm Δ λ = 5 nm
560 nm Δ λ = 5 nm
580 nm Δ λ = 5 nm
610 nm Δ λ = 6 nm
660 nm Δ λ = 5 nmWavelength Accuracy ± 1nm Photometric Accuracy 2% full scale (at 20 ° C to 25 ° C) Photometric Resolution 0.005 A Operation Acid and solvent resistant touch sensitive keypad; audible feedback via integrated beeper Power Supply 4 x AA batteries; operating time 26 hours continuous or 3500 tests Auto Off approx 20 minutes after last keypress with audible signal Dimensions Unit 210 x 95 x 45 mm
Carry case 395 x 295 x 106 mmUnit Weight 450g Ambient Conditions 5-40 ° C, 30-90% rel humidity (non condensing) Memory Capacity 1000 data sets with time, date, sample ID Conformity CE ລາຄາ 1.887$ ບໍ່ລວມອາກອນ
